Vertical multistage pump
2 Poles (2,900 rpm)
Flow: 0.5 to 24 m3/hr
Head: 220 to 14m
Motor: 0.37 to 18.5 kW
Speed: 2,900 rpm
Liq. Temp: -30 to 140°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:
EVMSG: AISI 304 with cast iron bottom casing
EVMS: Complete AISI 304
EVMSL: Complete AISI 316
Sizes: 1, 3, 5,10,15,20
APPLICATIONS:
clean water pressure boosting for high rise buildings, boiler feed, Water filtration, reverse osmosis, Sprinklers and irrigation.
Horizontal end suction pump
2 poles (2,900 rpm)
Flow: 8 to 200 m3/hr
Head: 90 to 8m
ddMotor: 1.1 to 55 kW d
Speed: 2,900 rpm
4 poles (1450 rpm)
ddFlow: 4 to 100 m3/hr
Head: 22 to 5m
Motor: 0.25 to 7.5 kW
Speed: 1,450 rpm
FABRICATED STAINLESS STEEL PUMPS UPTO SIZE 65-200
3M/3LM – MONOBLOC 3S/3LS – CLOSE COUPLED P/3LP – LONG COUPLED
CONSTRUCTION (3 SERIES):
CASING: AISI 304
IMPELLER: AISI 304
SHAFT: AISI 304
CONSTRUCTION (3L SERIES):
CASING: AISI 316
IMPELLER: AISI 316
SHAFT: AISI 316L
CASTED STAINLESS STEEL PUMPS SIZE 65-250 ONWARDS
3LM – MONOBLOC 3LS-CLOSE COUPLED 3LP – LONG COUPLED
CONSTRUCTION (3L SERIES):
CASING: AISI 316L
IMPELLER: AISI 316L
SHAFT: AISI 316L
APPLICATIONS:
pumping clean water for buildings, commercial complexes, fire-fighting, industries, water treatment plants, commercial laundry machines, packaged unitary refrigeration systems and HVAC systems and irrigation.
Horizontal end suction pump
2 poles (2,900 rpm)
Flow: 8 to 110 m3/hr
Head: 67 to 8m
Motor: 1.1 to 2 kW
Speed: 2,900 rpm
4 poles (1450 rpm)
Flow: 4 to 55 m3/hr
Head: 18 to 2m
Motor: 0.25: 3 kW
Speed: 1,450 rpm
3D – MONOBLOC 3DS – CLOSE COUPLED 3DP – LONG COUPLED
CONSTRUCTION:-
CASING : Cast iron
IMPELLER: AISI 304
Size 32, 40, 50
AISI 316 size 65
SHAFT : AISI 304
APPLICATIONS:
pumping clean water for buildings, commercial complexes, fire-fighting, industries, water treatment plants, commercial laundry machines, packaged unitary refrigeration systems and HVAC systems and irrigation.
Monobloc end suction pump
Flow: 1.25 to 65 m3/hr
Head: 55 to 6m
Motor: 0.37 to 2.2 kW
Speed: 2,900 rpm
Liq. Temp: 5° to 90°C
1ph & 3ph, 50 Hz
CONSTRUCTION:-
Casing : Cast iron
Impeller: PPE and Brass in various sizes.
APPLICATIONS:-
Drinking water, domestic water boosting and irrigation, emptying Small reservoirs and swimming pools.
Horizontal Monobloc multistage pump
Flow: 1.25 to 24 m3/hr
Head: 90 to 10 m
Motor: 0.45 to 4 kW
Speed: 2,900 rpm
Liq. Temp: -15 to +110°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing : AISI 304
Impeller : AISI 304
APPLICATIONS:-
Drinking water, domestic water boosting for low rise buildings and irrigation, emptying small reservoirs, general movement of clean water.
Monobloc End suction pump
Flow: 1.2 to 13.8 m3/hr
Head: 36 to 14 m
Motor: 0.37 to 1.8 kW
Speed: 2,900 rpm
Liq. Temp: -5° to 120°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
CDX: All wet parts in AISI 304
CDXL: All wet parts in AISI 316
APPLICATIONS:-
Domestic water transfer, small scale garden irrigation, general Movement of clean water.
Monobloc End suction pump
Flow: 1.2 to 13.8 m3/hr
Head: 36 to 14 m
Motor: 0.37 to 1.8 kW
Speed: 2,900 rpm
Liq. Temp: -5°C to 120°C
1ph & 3ph, 50 Hz
CONSTRUCTION:-
Complete pump in AISI 304
APPLICATIONS:-
Domestic water transfer, small scale irrigation, Water treatment and OEM applications.
Monobloc end suction two stage pump
Flow: 1.2 to10.5 m3/hr
Head: 66 to 28m
Motor: 0.75 to 3.7 kW
Speed: 2,900 rpm
Liq. Temp: -5° to 110°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
CDX: All wet parts in AISI 304
CDXL: All wet parts in AISI 316
APPLICATIONS:-
Domestic water transfer, small scale garden irrigation, general movement of clean water.
Monobloc end suction pump with semi-open impeller for handling solids
Flow: 10 to 60 m3/hr
Head: 17 to 6 m
Motor: 1.1 to 3 kW
Speed: 2,900 rpm
Liq. Temp: -5 to 110°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
All wet parts in AISI 304
APPLICATIONS:-
Pumping water from kitchen drains containing residues of vegetables, meat, fish and cooked food, light industrial drains and paint booths.
Monobloc end suction pump with optional insulation for preventing of condensation
Flow: 8 to 40 m3/hr
Head: 22 to 7 m
Motor: 1.1 to 3 kW
Speed: 2,900 rpm
Liq. Temp: -15 to 110°C
1ph & 3ph, 50 Hz.
CONSTRUCTION: -
All wet parts in SS 304
APPLICATIONS:-
Clean water for unitary HVAC and Refrigeration systems, washing systems and applications requiring high or low temperature water.
Submersible pump with single channel impeller handling upto 45 mm solids
Flow: 4 to 48 m3/hr
Head: 20 to 4 m
Motor: 0.55 to 2.2 kW
Speed: 2,900 rpm
Liq. Temp: up to 40°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing: SS304
Impeller: SS304
APPLICATIONS:-
pumping sewage, waste water and drain water containing solids.
Submersible drainage pump
Flow: 1.8 to 90 m3/hr
Head: 36 to 3 m
Motor: 0.25 to 7.5 kW
Speed: 2,900 rpm
Liq. Temp: 0 to 40°C
3ph, 50 Hz.
CONSTRUCTION: -
Casing: Cast iron
Impeller: Cast iron / SS 304
APPLICATIONS:-
Dewatering from sumps, drainage, foul water and rain water.
Submersible pump with semi-vortex impeller
Flow: 2.4 to 54 m3/hr
Head: 20 to 4 m
Motor: 0.4 to 3.7 kW
Speed: 2,900 rpm
Liq. Temp: upto 80°C
3ph, 50 Hz.
CONSTRUCTION: -
Casing: Cast iron
Impeller: Cast iron / SS 304
APPLICATIONS:-
Dewatering from sumps, drainage, foul water and rain water.
Submersible pump with suction strainer
Flow: 2 to 18 m3/hr
Head: 18 to 4 m
Motor: 0.55 to 1.5 kW
Speed: 2,900 rpm
Liq. Temp: up to 35°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing : SS304
Impeller: SS304
APPLICATIONS:-
pumping clean water, foul water, waste water, drain water, empting tanks and sumps.
Submersible pump with suction strainer
Flow: 1.2 to 9 m3/hr
Head: 8 to 2.5 m
Motor: 0.25 kW
Speed: 2,900 rpm
Liq. Temp: up to 50°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing: SS304
Impeller: SS304
APPLICATIONS:-
Pumping clean water, foul water, waste water, drain water, empting tanks and sumps and domestic irrigation.
Submersible pump with suction strainer
Flow: 1 to 8 m3/hr
Head: 7 to 2 m
Motor: 0.25 kW
Speed: 2,900 rpm
Liq. Temp: up to 50°C
1ph, 50 Hz.
CONSTRUCTION:-
Casing: SS 304
Impeller: PPE + PS
APPLICATIONS:-
Pumping clean water, foul water, waste water, drain water, empting tanks and sumps and domestic irrigation.
Vertical in-line pump in stainless steel construction
Flow: 1.2 to 24 m3/hr
Head: 19 to 2.5 m
Motor: 0.08 to 1.5 kW
Speed: 2,900 rpm
Liq. Temp: up to 100°C
1ph & 3ph, 50 Hz.
CONSTRUCTION: -
Casing : SS 304
Impeller: SS 304
APPLICATIONS:-
Circulating clean water and glycol for residential and commercial heating &air conditioning system, solar water heaters.
In-line circulator with permanent magnet motor
Flow: 0.75 to 4 m3/hr
Head: 5.8 to 0.5 m
Speed: Fixed speed
(3 selectable speed levels)
Liq. Temp: +5 to +65°C
1ph, 50 Hz.
CONSTRUCTION:-
Casing : Bronze
Impeller: Polyamide runner
APPLICATIONS:-
Circulating pump for sanitary water systems.
Self – priming pump
Flow: 0.5 to 4.1 m3/hr
Head: 55 to 20 m
Motor: 0.37 to 1.1 kW
Speed: 2,900 rpm
Max liq. Temp: 45°C
1ph & 3ph, 50 Hz
CONSTRUCTION:-
Pump casing, motor bracket,
Seal housing, motor casing:
AISI 304
Impeller: PPE reinforced & AISI 304
APPLICATIONS:-
Drinking water, domestic water boosting and irrigation, emptying small reservoirs and swimming pools
Self – priming pump
Flow: 0.5 to 4.1 m3/hr
Head: 55 to 20 m
Motor: 0.37 to 1.1 kW-
Speed: 2,900 rpm
Max Liq. Temp: 45°C
1ph & 3ph, 50 Hz
CONSTRUCTION:-
Pump casing, motor bracket,
Seal housing: AISI 304
Impeller: PPE reinforced & AISI 304
APPLICATIONS:-
Drinking water, domestic water boosting and irrigation, emptying small reservoirs and swimming pools.
Centrifugal self-priming pumps with integrated filter
Flow: 2 to 16 m3/hr
Head: 15 to 6 m
Motor: 0.33 to 0.75 kW
Speed: 2,900 rpm
Liq. Temp: up to 40°C
1ph, 50 Hz
APPLICATIONS:-
Clean or slightly dirty water, water containing chlorine or additives for pools
Centrifugal self – priming pumps with integrated filter
Flow: 4 to 31 m3/hr
Head: 22 to 6 m
Motor: 0.55 to 2.2 kW
Speed: 2,900 rpm
Liq. Temp: up to 40°C
1ph & 3ph, 50 Hz.
APPLICATIONS:-
Clean or slightly dirty water, water containing chlorine or additives for pools.
Submersible centrifugal pump
Flow: 0.5 to 6.5 m3/hr
Head: 80 to 15 m
Motor: 0.44 to 1.5 kW
Speed: 2,900 rpm
Liq. Temp: up to 40°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
casing : SS 304
Impeller : PPE + PS reinforced
with fiber glass
APPLICATIONS:-
pumping clean water from open wells, tanks, domestic water supply and irrigation
Submersible dewatering pump
Flow: 3 to 380 m3/hr
Head: 80 to 3 m
Motor: 1 to 37 kW
Speed: 2,900 rpm
Liq. Temp: up to 40°C
1ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing: options in Aluminum, Steel & SS 316
Impeller: Nitride hardened SS 410
APPLICATIONS:-
Dewatering muddy and brackish water from construction sites, mines, sumps and flooded areas.
submersible sewage pump with cutter handling up to 57 mm solids and 300mm fibers.
Flow: 3.6 to 120 m3/hr
Head: 21 to 3 m
Motor: 0.4 to 7.5 kW
Speed: 1,450 rpm
Liq. Temp: 0 to 40°C
3ph, 50 Hz
CONSTRUCTION:-
Casing: Cast iron
Impeller: Cast iron / SS304
APPLICATIONS:-
Pumping sewage, waste water and drain water containing solids and fibers.
Submersible sewage pump with semi-open impeller handling upto 88 mm solids
Flow: 6 to 660 m3/hr
Head: 48 to 4 m
Motor: 1.5 to 45 kW
Speed: 1,450 rpm
Liq. Temp: 0 to 40°C
3ph, 50 Hz.
CONSTRUCTION:-
Casing: Cast iron
Impeller: Cast iron / SS 304
APPLICATIONS:-
pumping sewage, waste water and drain water containing solids and fibers.
Submersible sewage pump with single channel impeller handling upto 76 mm solids.
Flow: 12 to 300 m3/hr
Head: 38 to 5 m
Motor: 2.2 to 22 kW
Speed: 1,450 rpm
Liq. Temp: 0 to 40°C
3ph, 50 Hz
CONSTRUCTION:-
Casing: Cast iron
Impeller: Cast iron
APPLICATIONS:-
Pumping sewage, waste water and drain water containing solids and fibers
Submersible sewage pump with vortex impeller handling upto 100 mm solids
Flow: 15 to 168 m3/hr
Head: 30 to 5 m
Motor: 2.2 to 22kW
Speed: 1,450 rpm
Liq. Temp: 0 to 40°C
3ph, 50 Hz.
CONSTRUCTION:-
Casing: Cast iron
Impeller: Cast iron
APPLICATIONS:-
Pumping sewage, waste water and drain water containing solids and fibers.
4 ‘’ Borehole centrifugal pump
Flow: 1 to 23 m3/hr
Head: 300 to 40m
Motor: 0.37 to 7.5 kW
Speed: 2,900 rpmeep
Liq. Temp: up to 35°C
1 ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing: SS 304
mpeller: technopolymer
APPLICATIONS:-
Pumping clean water from deep wells, pressure boosting, irrigation, fountains.
4’’ Borehole Centrifugal pump
Flow: 1 to 17m3/hr
Head: 250 to 15m
Motor: 0.55 to 5.5 kW
Speed: 2,900 rpm
Liq. Temp: 40°C
1 ph & 3ph, 50 Hz.
CONSTRUCTION:-
Casing: SS 304
Impeller: SS 304
APPLICATIONS:-
Pumping clean water from deep wells, pressure boosting, irrigation, fountains.
6’’ Borehole centrifugal pump
Flow: 5 to75m3/hr
Head: 550 to 30 m
Motor: 4 to 55 kW
Speed: 2,900 rpm
Liq. Temp: -5 to 60°C
3ph, 50 Hz
CONSTRUCTION:-
Casing: SS 304 & SS 316
Impeller: SS 304 & SS 316
APPLICATIONS:-
Pumping clean water from deep wells, pressure boosting, irrigation, fountains, fighting plants
Horizontal split case pump with special materials for aggressive liquids.
4 poles (1,450 rpm)
Flow: 150 to 1800m3/hr
Head: 120 to 7 m
Motor: 7.5 to 450 kW
Speed: 1,450 rpm
Liq. Temp: up to 80°C
3ph, 50 Hz.
6 poles (960 rpm)
Flow: 108 to 2,700m3/hr
Head: 95 to 4 m
Motor: 2.2 to 132 kW
Speed: 960 rpm
CONSTRUCTION:-
Casing: SS 304 / SS 316
duplex SS
Impeller: SS 304/ SS 316
duplex SS
APPLICATIONS:-
Pumping sea water, river water and aggressive liquids. Widely used for pumping aggressive liquids in refineries, fertilizer and chemical industries.
Long coupled end suction process pump with semi-open impeller
2 poles (2,900 rpm)
Flow: 4 to 120m3/hr
Head: 100 to 20 m
Motor: 1.5 to 55 kW
Speed: 2,900 rpm
Liq. Temp: -29 to +150°C
3ph, 50 Hz
4 poles (1,450 rpm)
Flow: 2.4 to 66 m3/hr
Head: 35 to 5 m
Motor: 0.4 to 15 kW
Speed: 1,450 rpm
CONSTRUCTION:-
Casing: Stainless steel
mpeller: Stainless steel
APPLICATIONS:-
pumping process liquids in chemical and petrochemical industries.
Long coupled end suction process pump with open impeller
Flow: 54 to 780 m3/hr
Head: 70 to 6 m
Motor: 2.2 to 160 kW
Speed: 960 rpm
Liq. Temp: -29 to +150°C
3ph, 50 Hz.
CONSTRUCTION:-
Casing: Stainless steel
Impeller: Stainless steel
APPLICATIONS:-
Pumping process liquids in chemical and petrochemical industries.
Long coupled end suction pump in casted stainless steel construction
2 Poles (2,900 rpm)
Flow: 9 to 120 m3/hr
Head: 95 to 7 m
Motor: 0.75 to 22 kW
Speed: 2,900 rpm
Liq. Temp: 0 to 100°C
3ph, 50 Hz
4 poles (1,450 rpm)
Flow: 9 to 60 m3/hr
Head: 24 to 5 m
Motor: 0.4 to 3.7 kW
Speed: 1,450 rpm
CONSTRUCTION:-
Casing: SS316
Impeller: SS316
APPLICATIONS:-
Pumping aggressive liquids such as brackish water, hot spring water, oils and chemicals. Widely used in chemical and petrochemical industry
Long coupled end suction pump in casted stainless steel construction
2 Poles (2,900 rpm)
Flow: 3 to 300 m3/hr
Head: 140 to 5 m
Motor: 0.37 to 132 kW
Speed: 2,900 RPM
Liq. Temp: -40 to +150°C
3ph, 50 Hz
4 Poles (1,450 rpm)
Flow: 3 to 660 m3/hr
Head: 90 to 5m
Motor: 0.37 to 315 kW
Speed: 1,450 rpm
CONSTRUCTION:-
Casing: SS304/ SS316
Impeller: SS304/ SS316
APPLICATIONS:-
Pumping aggressive liquids such as brackish water, hot spring water, oils and chemicals. Widely used in chemicals and petrochemical industry