Irrigation Products

Irrigation Products

employee

SPRINKLING

Adjustable sprinlers 40º-360º

8 nozzles and plastic cover
Working pressure: 2,1 – 3,4 bar
Range: 4,6 – 13,5m.
Inlet: 1/2″ F & 3/4″F

 ELECTRIC VALVES

ELECTRIC VALVES

Plastic electric valves (reinforced Nylon) specially suited for the turf irrigation; sizes from 3/4” to 2”; with flow control and available in 9 V lacht or 24 VAC.

Compact design and ergonomic, user-friendly and easy maintenance. Fully opening and secure drip-tight closing.

CONTROLLERS

CONTROLLERS

Launching of a new range of controllers Opar branded and light line for any kind of application, from the simple tap controller to a complete wall controller.

 PP COMPRESSION FITTINGS

PP COMPRESSION FITTINGS

We offer two ranges of PP compression fittings: Performance Series and Standard Series. Both are made according to standards EN 712 / 713 / 715 / and ISO 3501 / 3503 / 3458 /3459, and are suitable for installation on PE pipes conforming to ISO 11922; DIN 8072 / 8074; and UNE 53131.


These fittings allow for a quick, simple insertion of the tube,
considerably reducing installation time: simply loosen the nut (without removing it), and insert the pipe.

IRRIGATION FITTINGS

IRRIGATION FITTINGS

Our philosophy of maintaining the highest standard in customer service is also reflected in our accessories products. We offer all the necessary accessories to complete your installation: clamp saddles, pipe clips, threaded fittings, hose couplings, SBE fittings, irrigation fittings, etc.

 IRRIGATION VALVES

IRRIGATION VALVES

We offer a complete range of valves for the irrigation world, including hydraulic valves, angle seat valves (in several versions), and air release valves.

CHECK VALVES

CHECK VALVES

We design and manufacture an extensive family of check valves that can be used for a wide range of applications. These valves provide an exact and reliable control of fluids, and have been designed to offer maximum modularity and flexibility.

Spring check and ball versions are available in PVC-U and Corzan CPVC.
This standard supercedes BS 4514 : 1993 and BS 5255 : 1989.
As with other Opar valve products, check valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS…).

 BUTTERFLY VALVES STANDARD SERIES

BUTTERFLY VALVES STANDARD SERIES

We offer an extensive range of PVC butterfly valves ideally suited for flow control using minimal piping space. They are resistant to several chemicals and offer excellent flow characteristics.
Available in accordance with several dimensioning standards (ISO/DIN, ANSI/ASTM, British Standard, JIS).

BALL VALVE [STD] SERIES

BALL VALVE [STD] SERIES

We offer a complete range of ball valves in PVC-U, featuring the “Antiblock” system which prevents ball jamming. Valves are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed by the world’s premier certification institutes.

Ball valves are available in accordance with several dimensioning standards (Metric, BSP, ASTM, NPT, British Standard, JIS…)
in order to meet the requirements of any market.

FILTRATION MANUAL AND AUTOMATIC

FILTRATION MANUAL AND AUTOMATIC

The Opar filtration range is based on low maintenance and optimum safety in filtration. New TWISTER system which helps to a water saving and filter long life. Optimization of the performance and minimum frequency and intensity of maintenance labours.

PE100 FITTINGS

PE100 FITTINGS

Polyethylene (PE) is a thermoplastic that belongs to the group of polyolefines. Partially crystalline, it is an environmentally compatible product.

In comparison to other thermoplastics, PE shows essential advantages which make it specially suitable for water and gas distribution applications, but can also be used in irrigation systems, industrial facilities or in building installations.
Also described as third generation polyethylene types (or MRS 10), offers higher density and therefore improved mechanical properties to previous developments (PE 80 / PE63). The employed PE-material complies with the requirements of EN 12201 (plastic pipe systems for drinking water supply) and EN 1555 (plastic pipe systems for gas supply).

VALVE BOXES

VALVE BOXES

Opar valve boxes enable the integration of valve assemblies or other elements into underground systems where easy access is required. These products are made of PP and designed to perform in even the most demanding environments. We have circular and rectangular valve boxes with snap-fit, twist-lock, and screw-on covers.

PVC PRESSURE FITTINGS

PVC PRESSURE FITTINGS

As demonstrated by our product certifications (AENOR, AFNOR, Kiwa, etc.),

We offer the highest-level guarantee for all its PVC Fittings for pressurized fluid handling applications. The extensive range of sizes and combinations we offer will accommodate any system design. The dimensions of our fittings comply with UNE-EN 1452-3, UNE-EN 1452-3, DIN 8063, and NF 54016/54029 standards, while many of our products meet other standards as well, including British, ASTM and Thai.

Top